So, ASMR videos are all the rage on YouTube, right? The goal is to create a “low grade euphoria” from a sensory response. When my husband started telling me about these videos, I shared with him an experience I had watching a scene in the series “Alias Grace” where they were unfolding quilts.
I thought, this is the perfect ASMR video for quilt lovers! So here you are. A new YouTube/Twitch series I’m working on.
By now, you have, of course, heard about all the great therapeutic benefits of weighted blankets for children with a variety of diagnoses. No? Well, don’t feel bad, I was out of the loop, too…until my friend, Sheri, asked me about them for her daughter.
Ok, now that you know you want a weighted blanket, the second phase is sticker shock.
So – you do what any smart parent does, you seek out local artisans to make one for you! Disclaimer: I make and sell custom weighted blankets!
Unfortunately there is still a bit of sticker shock, as the materials are the major cost involved. Next best alternative? Make it yourself!
Why on earth would someone who makes and sells weighted blankets give you instructions to make it yourself? Well, my reasoning is two fold:
1) You will see (as I will tell you) the cost of the materials involved, and why the cost is so high to have someone make it for you
2) The potential benefits to your child out-weigh the benefit to my bottom line. I’d rather help you make one, than to have your child do without. If it takes away a “sale” of mine (or anyone else, well, too bad for us. But your child/ren benefit/s, which benefits everyone (the greater good!), so I’m happy to share my experience with you.
Ok, roll up your sleeves!
You will need: two pieces of fabric (I used cotton), 1.5 yards long and 44″ wide. This makes a great blanket for up to about a 10 year old, depending on their height.
Right sides together, serge three sides (two long, one short). I leave the top open (rather than the bottom), just a preference.
I added ties to the four corners, because this weighted blanket I paired with a duvet cover. Weighted blankets are (in my opinion) not fun to wash. So a duvet cover means less frequent abuse of the washer and dryer.
Scroll down for complete instructions (after all the pix).
Ok, so when you make the vertical lines of stitches, stop a couple of inches (maybe one inch) from the top. Leave room to fold over the raw edges after you sew the final horizontal line of stitching.
I’m terrible at formatting these blog posts. Please forgive me.
I tried to put the instructions in the captions of the photos. Hopefully it’s clear what you need to do.
Right sides together, sew two sides and bottom (I used a serger, but it’s not mandatory!).
Turn the blanket right side out.
Push out corners and press.
Top stitch the same sides you just sewed/serged.
Mark vertical lines running from the bottom of the blanket up to the open top of the blanket. Chalk is not your friend.
Sew the vertical lines from BELOW the topstitch line, taking some reverse stitches to lock your stitches, all the way to about an inch short of the open top end of the blanket.
Calculate how many squares your blanket will have, how much weight per square: In my project, I used 5″ squares. I had 8 squares across and 11 squares down, for a total of 88 squares. The recipient needed 7 pounds of weight. So covert your pounds to ounces. There are 16 ounces in a pound. 7×16 = 112. Divide the number of ounces by the number of squares (112/88=1.27…). So, we want about 1.25 oz per square.
Measure using a small kitchen square, (be sure to subtract the weight of the cup, or set the scale to Zero with the cup on the scale, if your scale does that).
Pour the pellets into the channel made by the sewn vertical lines. Measure, pour, measure, pour. Fill one square at a time, moving horizontally across the blanket.
Once all the channels have had their allotted pellets poured into the channels, hold up the blanket and shake, dispersing the pellets to the bottom of the blanket.
Pin close to the pellets, a solid line of pins, such that no pellets can escape. Make the line of pellets lower than the line you will be sewing, by a fair margin, so that you don’t sew over pellets.
Sew your horizontal line, sealing in the row of pellets into neat little squares.
Measure, pour, shake, pin and sew the next row.
Continue until you are doing the last row. Prior to sewing the horizontal stitching across the top of the blanket, fold in the raw edges at the top. When you sew the top line, it will make a nice edge. However, you need to sew two lines here, for security and to catch the raw edge under. Make sense?
Ok, so here are some links to the products I used:
These are the poly pellets. If you buy them at Hobby Lobby, they are $5/pound. If you buy in bulk at amazon, much cheaper.
Joann’s is where I got the Hello Kitty fabric. They don’t seem to have the exact fabric, but HERE is something similar.
I used regular Coats & Clark hot pink poly/cotton thread for the regular machine and their serger thread in the serger.
Please ask any questions if I’ve been confusing. Best of luck!
Where do I start? First with the declaration that my son won Christmas. Not just at my house, but globally.
Let me explain. He made literally the coolest present ever. A video game. For me. From scratch. About quilting.
I will talk about it more tomorrow. But here are some screen shots in the meantime:
My boss’ wife has been in the hospital for nearly three weeks, so my co-worker, Jessie, and I decided to make her a quilt. I donated the jelly roll
And Jessie added some from her own stash to make this vibrant top:
I immediately took Well Blankie off the frame and put this quilt on instead.
I picked out a great pantograph design, and assumed I could finish the quilting in one evening, two max! A week later I still haven’t finished the quilting.
There have been a combo of factors. Birthdays, cleaning, getting sick, a funeral and then my back giving out! I’m still diligently plugging away.
Here are some shots of the panto:
I’ll keep you posted on when I finally finish this thing!!!